ثامن کنترل شرق

RE17RAMU

Harmony, Modular timing relay, 8 A, 1 CO, 1 s..100 h, on delay, 24 V DC / 24...240 V AC/DC

5/5 - (11 امتیاز)
تعداد
محصولات مرتبط
توضیحات محصول

RE17RAMU – تایمر تاخیر در وصل ۱ ثانیه تا ۱۰۰ ساعت اشنایدر

Harmony, Modular timing relay, 8 A, 1 CO, 1 s..100 h, on delay, 24 V DC / 24…240 V AC/DC

Harmony Timer Relays

Near Field Communication and conventional Timer Relays (formerly known as Zelio Timer Relays)

Part of Harmony

A complete range of high-performance timing relays for industrial applications. Available in conventional dials or NFC.

تایمر تاخیر در وصل ۱ ثانیه تا ۱۰۰ ساعت اشنایدر 

  • – جریان خروجی ۸A
  • – زمان قابل تنظیم از ۰٫۱ ثانیه تا ۱۰۰ ساعت
  • – ولتاژ تغذیه ۲۴ تا ۲۴۰ ولت AC و ۲۴ ولت DC
  • – عملکرد A, At
  • – کنتاکت ۱ solid state
  • – نوع ۲function

رله کنترل فاز از الکتروموتور و تجهیزات آن در برابر اختلالات ولتاژی در سیستم های سه فاز محافظت می کند. این رله ها تغییر توالی فازها، قطعی یک یا چند فاز، عدم تقارن فازها، آورولتاژ و آندرولتاژ را تشخیص می دهند. رله کنترل فاز در صورت تشخیص هریک از این موارد قبل از وارد شدن خسارت پرهزینه، مدار فرمان را قطع می کند.

رله کنترل فاز بر توالی صحیح سه فاز L1,L2,L3 و قطعی یک یا چند فاز، آورولتاژ یا آندرولتاژ و عدم تقارن فازها نظارت دارد. زمانی که ولتاژ سه فاز برقرار و وضعیت فازها(ولتاژ و توالی فازها) صحیح باشد، خروجی رله در حالت تحریک است و چراغ های نشانگر روشن هستند. اگر توالی فاز به هم بخورد یا قطعی فاز تشخیص داده شود، رله سریعاً باز می شود. اگر عدم تقارن یا خطای ولتاژ تشخیص داده شود، رله پس از تأخیر زمانی تنظیم شده توسط کاربر، باز می شود. اگر در زمان تشخیص خطا رله تحریک شود، در حالت باز یا قطع باقی می ماند.

پس از وصل شدن سه فاز و نول به ترمینال های L1, L2L3,  N و در صورت مناسب بودن ولتاژها، نشانگر سبز (Un) روشن می شود و بعد از طی شدن زمان تأخیر (بین 1 تا 10 ثانیه)، با روشن شدن نشانگر (R) کنتاکت خروجی رله وصل می شودزمان سنجی در شرایط عادی فازها شروع می شود. رویداد خطا موجب قطع رله خروجی می شود و هر دفعه پس از برطرف کردن خطا، زمان سنجی از صفر شروع می شود.

سوالات متداول
مشخصات فنی
Main
range of product Harmony Timer Relays
product or component type Dual function relay
discrete output type Relay
width 17.5 mm
device short name RE17R
time delay type Power on-delay
time delay range 1…10 min
10…100 h
0.1…1 s
6…60 s
6…60 min
1…10 s
1…10 h
nominal output current 8 A
Complementary
contacts type and composition 1 C/O
contacts material Cadmium free
height 90 mm
depth 72 mm
control type Selector switch front panel
[Us] rated supply voltage 24…240 V AC 50/60 Hz
24 V DC
voltage range 0.85…1.1 Us
supply frequency 50…60 Hz +/- 5 %
release of input voltage 10 V
connections – terminals Screw terminals, 1 x 0.5…1 x 3.3 mm² (AWG 20…AWG 12) solid without cable end
Screw terminals, 2 x 0.5…2 x 2.5 mm² (AWG 20…AWG 14) solid without cable end
Screw terminals, 1 x 0.2…1 x 2.5 mm² (AWG 24…AWG 14) flexible with cable end
Screw terminals, 2 x 0.2…2 x 1.5 mm² (AWG 24…AWG 16) flexible with cable end
tightening torque 0.6…1 N.m conforming to IEC 60947-1
housing material Self-extinguishing
repeat accuracy +/- 0.5 % conforming to IEC 61812-1
temperature drift +/- 0.05 %/°C
voltage drift +/- 0.2 %/V
setting accuracy of time delay +/- 10 % of full scale at 25 °C conforming to IEC 61812-1
control signal pulse width 100 ms with load in parallel typical
30 ms typical
insulation resistance 100 MOhm at 500 V DC conforming to IEC 60664-1
reset time 120 ms on de-energisation typical
on-load factor 100 %
power consumption in VA 0…32 VA at 240 V AC
maximum power consumption in W 0.6 W at 24 V DC
minimum switching current 10 mA at 5 V DC
maximum switching current 8 A AC/DC
maximum switching voltage 250 V AC
breaking capacity 2000 VA
operating frequency 10 Hz
electrical durability 100000 cycles (8 A at 250 V AC maximum) for resistive load
mechanical durability 10000000 cycles
dielectric strength 2.5 kV 1 mA/1 minute 50 Hz conforming to IEC 61812-1
[Uimp] rated impulse withstand voltage 5 kV during 1.2/50 µs
power on delay 100 ms
marking CE
creepage distance 4 kV/3 conforming to IEC 60664-1
safety reliability data B10d = 270000
MTTFd = 296.8 years
mounting position Any position in relation to normal vertical mounting plane
mounting support 35 mm DIN rail conforming to EN/IEC 60715
local signalling LED indicator for on steady: relay energised, no timing in progress
LED indicator for flashing: timing in progress 80 % ON and 20 % OFF
LED indicator for pulsing: relay de-energised, no timing in progress (except function Di-D, Li-L) 5 % ON and 95 % OFF
net weight 0.07 kg
time delay type A, At
functionality On-delay timing
compatibility code RE17
Environment
immunity to microbreaks 20 ms
standards 2006/95/EC
2004/108/EC
IEC 61812-1
EN 61000-6-3
EN 61000-6-1
EN 61000-6-4
EN 61000-6-2
product certifications CSA
cULus
GL
ambient air temperature for storage -30…60 °C
ambient air temperature for operation -20…60 °C
IP degree of protection IP20 (terminal block) conforming to IEC 60529
IP40 (housing) conforming to IEC 60529
IP50 (front panel) conforming to IEC 60529
vibration resistance 20 m/s² (f= 10…150 Hz) conforming to IEC 60068-2-6
shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
relative humidity 93 % without condensation conforming to IEC 60068-2-30
electromagnetic compatibility Electrostatic discharge immunity test: (in contact), level 3, 6 kV, conforming to IEC 61000-4-2
Electrostatic discharge immunity test: (in air), level 3, 8 kV, conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields: (80 MHz to 1 GHz), level 3, 10 V/m, conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test: (capacitive connecting clip), level 3, 1 kV, conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test: (direct), level 3, 2 kV, conforming to IEC 61000-4-4
1.2/50 µs shock waves immunity test: (differential mode), level 3, 1 kV, conforming to IEC 61000-4-5
1.2/50 µs shock waves immunity test: (common mode), level 3, 2 kV, conforming to IEC 61000-4-5
Conducted RF disturbances: (0.15…80 MHz), level 3, 10 V, conforming to IEC 61000-4-6
Voltage dips and interruptions immunity test: (1 cycle), 0 %, conforming to IEC 61000-4-11
Voltage dips and interruptions immunity test: (25/30 cycles), 70 %, conforming to IEC 61000-4-11
Conducted and radiated emissions: , class B, conforming to EN 55022
0