ثامن کنترل شرق

ATV610U30N4

Variable speed drive ATV610, 3 kW, 380...415 V, IP20

5/5 - (12 امتیاز)
توضیحات محصول

اینورتر سه فاز ۳kW اشنایدر کاربرد های پمپ و فن صنعتی ATV610U30N4  نمایندگی اینورتر اشنایدر

مشخصات اینورتر سه فاز ۳kW اشنایدر ATV610U30N4

اینورتر سه فاز ۳ کیلووات اشنایدر مدل ATV610U30N4 یک دستگاه الکترونیکی است که برای کنترل سرعت موتورهای الکتریکی سه فاز استفاده می‌شود. اینورترها به عنوان یکی از اصلی‌ترین قطعات در سیستم‌های اتوماسیون صنعتی استفاده می‌شوند. اینورتر اشنایدر دارای توان خروجی ۳ کیلووات (4 اسب بخار) است که برای کاربردهای صنعتی و تجاری مناسب است. همچنین، اینورتر ATV610U30N4 دارای ورودی سه فاز ۳۸۰ تا ۴۸۰ ولت AC و فرکانس ۵۰ یا ۶۰ هرتز است. اینورتر همچنین دارای ویژگی‌هایی مانند قابلیت کنترل سرعت، حفاظت از موتور، کنترل جریان و ولتاژ و … است.

اینورتر اشنایدر - اینورتر - خرید اینورتر - قیمت اینورتر اشنایدر - atv610u30n4

اینورترهای سری ATV610 جهت کنترل دور موتور آسنکرون (القائی) از توان ۰/۷۵ تا ۱۶۰ کیلووات مورد استفاده قرار می گیرند.

اینورتر اشنایدر - اینورتر - خرید اینورتر - قیمت اینورتر اشنایدر - atv610u30n4

کاربرد اینور اشنایدر ATV610

کاربرد اصلی اینورتر ۳ کیلو وات  اشنایدر مدل ATV610U30N4 جهت راه اندازی پمپ و فن (گشتاور متغیر) در صنایع مختلف به خصوص :

  • آب و فاضلاب
  • نفت و گاز
  • مدیریت ساختمان و نیروگاه می باشد.

بر اساس طراحی شرکت اشنایدر الکتریک در صورتی که توان اینورتر یک رنج بالاتر در نظر گرفته شود، استفاده از این مدل در کاربردهای سنگین نیز امکان پذیر می باشد. (به طور مثال اینورتر ۷۵ کیلو وات را می توان به عنوان درایو ۵۵ کیلو وات در کاربردهای سنگین استفده نمود.)

پروتکل ارتباطی Modbus به صورت پیش فرض بر روی درایو Altivar610 قرار داشته و تمامی حفاظت های جریانی، ولتاژی، حرارتی و … را شامل می شود.

لیست قیمت درایو اشنایدر ATV610U30N4

شما میتوانید برای مشاهده لیست قیمت اینورتر اشنایدر و کاتالوگ درایو اشنایدر به این صفحه مراجعه کنید .

محصولات مرتبط: 
نمایندگی اینورتر اشنایدر

استعلام خود را از طریق سایت ثامن کنترل شرق  یا ☎️ تلفن ، ✔️ واتساپ ، 📠 فکس یا 📧 ایمیل برای ما ارسال کنید. جواب استعلام پس از بررسی کارشناس فنی و بازرگانی بسته به نوع استعلام در اسرع وقت پاسخ داده خواهد شد. در صورت تایید پیشنهاد از نظر فنی و مالی تاییدیه به صورت کتبی برای فروشنده ارسال می شود. 🛒 بعد از تایید کتبی از خریدار و واریز پیش پرداخت , سفارش گذاری انجام می شود.

سوالات متداول
مشخصات فنی
Main
range of product
Easy Altivar 610
product or component type
Variable speed drive
product specific application
Fan, pump, compressor, conveyor
device short name
ATV610
variant
Standard version
product destination
Asynchronous motors
mounting mode
Cabinet mount
EMC filter
Integrated conforming to EN/IEC 61800-3 category C3 with 50 m
IP degree of protection
IP20
type of cooling
Forced convection
supply frequency
50…60 Hz +/-5 %
network number of phases
3 phases
[Us] rated supply voltage
380…415 V – 15…10 %
motor power kW
3 kW for normal duty
2.2 kW for heavy duty
motor power hp
3 hp for heavy duty
line current
10.1 A at 380 V (normal duty)
9.2 A at 415 V (normal duty)
7.6 A at 380 V (heavy duty)
7 A at 415 V (heavy duty)
prospective line Isc
5 kA
apparent power
6.6 kVA at 415 V (normal duty)
5 kVA at 415 V (heavy duty)
continuous output current
7.2 A at 4 kHz for normal duty
5.6 A at 4 kHz for heavy duty
maximum transient current
7.9 A during 60 s (normal duty)
8.4 A during 60 s (heavy duty)
asynchronous motor control profile
Constant torque standard
Variable torque standard
Optimized torque mode
Output frequency
0.0001…0.5 kHz
nominal switching frequency
4 kHz
switching frequency
2…12 kHz adjustable
number of preset speeds
16 preset speeds
communication port protocol
Modbus serial
option card
Slot A: communication card, Profibus DP V1
Slot A: digital or analog I/O extension card
Slot A: relay output card
Complementary
output voltage
<= power supply voltage
motor slip compensation
Adjustable
Automatic whatever the load
Not available in permanent magnet motor law
Can be suppressed
acceleration and deceleration ramps
S, U or customized
Linear adjustable separately from 0.01 to 9000 s
braking to standstill
By DC injection
protection type
Thermal protection: motor
Motor phase break: motor
Thermal protection: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
frequency resolution
Display unit: 0.1 Hz
Analog input: 0.012/50 Hz
electrical connection
Control, screw terminal: 0.5…1.5 mm²
Line side, screw terminal: 2.5…16 mm²
Motor, screw terminal: 2.5…16 mm²
connector type
1 RJ45 (on the remote graphic terminal) for Modbus serial
physical interface
2-wire RS 485 for Modbus serial
transmission frame
RTU for Modbus serial
transmission rate
4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
type of polarization
No impedance for Modbus serial
number of addresses
1…247 for Modbus serial
method of access
Slave
supply
External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
local signalling
2 LEDs for local diagnostic
1 LED (yellow) for embedded communication status
2 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
width
145 mm
height
297 mm
350 mm with EMC plate
depth
203 mm
net weight
2.4 kg
analogue input number
3
analogue input type
AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 12 bits
AI2, AI3 software-configurable temperature probe or water level sensor
discrete input number
6
discrete input type
DI1…DI6 programmable as logic input, 24 V DC (<= 30 V), impedance: 3.5 kOhm
DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
input compatibility
DI1…DI6: logic input level 1 PLC conforming to EN/IEC 61131-2
DI5, DI6: pulse input level 1 PLC conforming to IEC 65A-68
discrete input logic
Positive logic (source): DI1…DI6 configurable logic input, < 5 V (state 0), > 11 V (state 1)
Negative logic (sink): DI1…DI6 configurable logic input, > 16 V (state 0), < 10 V (state 1)
Positive logic (source): DI5, DI6 configurable pulse input, < 0.6 V (state 0), > 2.5 V (state 1)
analogue output number
2
analogue output type
Software-configurable current AQ1, AQ2: 0…20 mA, resolution 10 bits
Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits
sampling duration
5 ms +/- 0.1 ms (AI1, AI2, AI3) – analog input
2 ms +/- 0.5 ms (DI1…DI6)configurable – discrete input
5 ms +/- 1 ms (DI5, DI6)configurable – pulse input
10 ms +/- 1 ms (AQ1, AQ2) – analog output
accuracy
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
linearity error
AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
AQ1, AQ2: +/- 0.2 % for analog output
relay output number
3
relay output type
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
refresh time
Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
minimum switching current
Relay output R1, R2, R3: 5 mA at 24 V DC
maximum switching current
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
isolation
Between power and control terminals
insulation resistance
> 1 MOhm 500 V DC for 1 minute to earth
Environment
noise level
55 dB conforming to 86/188/EEC
power dissipation in W
74 W(forced convection) at 380 V, switching frequency 4 kHz
29 W(natural convection) at 380 V, switching frequency 4 kHz
operating position
Vertical +/- 10 degree
electromagnetic compatibility
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs – 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
pollution degree
2 conforming to EN/IEC 61800-5-1
vibration resistance
1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to IEC 60068-2-27
relative humidity
5…95 % without condensation conforming to IEC 60068-2-3
ambient air temperature for operation
-15…45 °C (without derating)
45…60 °C (with derating factor)
operating altitude
<= 1000 m without derating
1000…4800 m with current derating 1 % per 100 m
environmental characteristic
Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3
standards
EN/IEC 61800-3
Environment 2 category C3 EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 60721-3
product certifications
REACH
marking
CE
0