ثامن کنترل شرق

ATS01N209QN

Soft starter for asynchronous motor - ATS01 - 9 A - 380..415 V - 4 KW

5/5 - (1 امتیاز)
تعداد
محصولات مرتبط
توضیحات محصول

سافت استارتر ATS01N209QN اشنایدر .

مقدمه

با سافت استارتر استرس های مکانیکی و الکتریکی ناشی از ضربه اولیه راه اندازی موتور را می توان از بین برد. از بین بردن ضربات قوچ در سیستم های انتقال سیالات نیز از مزایای این وسیله است. این ویژگی باعث افزایش طول عمر تجهیزات می گردد. سافت استارتر اشنایدر مدل ATS01، راه انداز انالوگ ساخت شرکت اشنایدر الکتریک است.

مشخصات کلی

ATS01 جزء سافت استارترهای آنالوگ بوده و ۲ عدد تریستور دارد. خانواده سافت استارتر اشنایدر مدل ATS01، رنج جریان نامی ۶ تا ۳۲ آمپر را پوشش می دهد. این محدوده برای کنترل موتور القایی سه فاز از ۳ نا ۱۵ کیلووات مناسب است. ATS01 دارای ۲ عدد LED جهت تشخیص وضعیت کاری دستگاه است. مانند هر سافت استارتر باید در کاربردهای با گشتاور راه اندازی کم استفاده شود. مثل کاربرد: فن، کمپرسور و پمپ. باید در نظر داشت که حداکثر زمان قابل تنظیم راه اندازی در این سافت استارت بسته به مدل بین ۱ تا ۱۰ ثانیه است. و چون این زمان بسته به نوع کاربرد متغییر است روی پنانسیومتر نتظیم زمان حروف A تا E درج شده است. واتاژ اولیه اعمالی به موتور نیز بین ۳۰ تا ۸۰ درصد قابل تغییر است.

امکانات و ویژگیها

کنترل موتور در مرحله راه اندازی و در مرحله توقف.

دارای ۲ عدد LED جهت تشخیص وضعیت کاری دستگاه

دارای ۳ عدد پتانسیومتر جهت تنظیم رمان های راه انداری، توقف و ولتاژ اولیه

دارای کنتاکتور کنارگذر( BY PASS) داخلی

وجود کنتاکت نشان دهنده پایان راه اندازی

مجهز به خروجی ۲۴ VDC داخلی

دارای فانکشن BOOST برای کاربردهای خاص

داری ورودی خروجی دیجیتالی

دارای ابعاد کوچک

نام تجاری اشنایدر الکتریک
حداکثر توان موتور سه فاز ۱۱ کیلووات, ۱۵ کیلووات, ۳ کیلووات, ۴ کیلووات, ۵٫۵ کیلووات, ۷٫۵ کیلووات
نوع سافت استارتر آنالوگ
مرحله کنترل هم راه اندازی و هم توقف
کنتاکتور کنارگذر (BY PASS) دارد
تعداد ورودی دیجیتال ۳
تعداد خروجی دیجیتال ۲

Features

Single-phase 110 – 230 V – 3-phase 200… 480 V 50/60 Hz – 0.37 to 15 kW*

  • Adjustable starting and deceleration times: 5 seconds or 10 seconds
  • Adjustable unjamming torque
  • Integrated bypass contactor
  • Simple dialogue by 2 LEDs
  • Signalling on completion of starting
  • ۲۴ V integrated power supply (ATS01N2…).
  • “Boost” function for difficult starting conditions (ATS01N2…).

* Range available up to 15 kW : please refer to our catalogue

Benefits

Your starting solution:

  • Extremely compact, the Altistart 01 combines simplicity with easy cabling, fast configuration and efficiency
  • Reduced machine wear and minimized maintenance time will optimize operations
  • Together with TeSys® Model U, you benefit from a unique motor starter solution.

Applications

  • Small compressors, fans
  • Conveyors, mats
  • Washing gantries
  • Advanced systems and decentralised architectures
سوالات متداول
مشخصات فنی
Main
range of product
Altistart 01
product or component type
Soft starter
product destination
Asynchronous motors
product specific application
Simple machine
device short name
ATS01
network number of phases
3 phases
[Us] rated supply voltage
380…415 V – 10…10 %
motor power kW
4 kW, 3 phases at 380…415 V
IcL starter rating
9 A
utilisation category
AC-53B conforming to EN/IEC 60947-4-2
current consumption
45 A at nominal load
type of start
Start with voltage ramp
power dissipation in W
4 W at full load and at end of starting
94 W in transient state
Complementary
assembly style
With heat sink
function available
Integrated bypass
supply voltage limits
342…456 V
supply frequency
50…60 Hz – 5…5 %
network frequency
47.5…63 Hz
output voltage
<= power supply voltage
[Uc] control circuit voltage
Built into the starter
starting time
1 s / 100
5 s / 20
10 s / 10
Adjustable from 1 to 10 s
deceleration time symb
Adjustable from 1 to 10 s
starting torque
30…80 % of starting torque of motor connected directly on the line supply
discrete input type
Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
discrete input voltage
24…40 V
discrete input logic
Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
discrete output current
2 A DC-13
3 A AC-15
discrete output type
Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO
discrete output voltage
24 V (voltage limits: 6…30 V) open collector logic
minimum switching current
10 mA at 6 V DC for relay outputs
maximum switching current
Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
display type
1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached
tightening torque
0.5 N.m
1.9…2.5 N.m
electrical connection
4 mm screw clamp terminal – rigid 1 1…10 mm² AWG 8 power circuit
Screw connector – rigid 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – rigid 2 1…6 mm² AWG 10 power circuit
Screw connector – rigid 2 0.5…1 mm² AWG 17 control circuit
Screw connector – flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm² AWG 8 power circuit
Screw connector – flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal – flexible with cable end 2 1…6 mm² AWG 10 power circuit
4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm² AWG 10 power circuit
Screw connector – flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit
marking
CE
operating position
Vertical +/- 10 degree
height
124 mm
width
45 mm
depth
131 mm
net weight
0.42 kg
compatibility code
ATS01N2
Motor power range AC-3
4…6 kW at 380…440 V 3 phases
motor starter type
Soft starter
Environment
electromagnetic compatibility
Conducted and radiated emissions level B conforming to CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
EMC immunity conforming to EN 50082-1
EMC immunity conforming to EN 50082-2
Harmonics conforming to IEC 1000-3-2
Harmonics conforming to IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
Voltage/current impulse level 3 conforming to IEC 61000-4-5
standards
EN/IEC 60947-4-2
product certifications
GOST
B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
CCC
CSA
C-Tick
UL
IP degree of protection
IP20
pollution degree
2 conforming to EN/IEC 60947-4-2
vibration resistance
1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
shock resistance
15 gn for 11 ms conforming to EN/IEC 60068-2-27
relative humidity
5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
ambient air temperature for operation
-10…40 °C (without derating)
40…50 °C (with current derating of 2 % per °C)
ambient air temperature for storage
-25…70 °C conforming to EN/IEC 60947-4-2
operating altitude
<= 1000 m without derating
> 1000 m with current derating of 2.2 % per additional 100 m
0